Armour Technology Australia undertakes regular testing of its projects. You will find some short video’s demonstrating some impact testing below. Further details and test results are posted underneath each video.

Testing Videos – Corrugated Sheet with ATA Impact Shield 1.6x3x32

Video One: End-on impact of a 4kg mass of timber with cross-section dimensions of 100mm x 50mm, impacting at 36m/s
Video One Result: Pass

Video Two: End-on impact of a 4kg mass of timber with cross-section dimensions of 100mm x 50mm, impacting at 44m/s
Video Two Result: Pass

Detail

  • Site: Azuma – NATA Testing
  • Product: ATA Impact Shield 1.6x3x32
  • Dimensions: 1000mm H x 2950mm W
  • Infill Material: Polyethylene Composite cladded with colour bond corrugated sheeting
  • Infill Material Thickness: P.E: 1.6mm
  • Colour bond corrugated sheeting: 0.42mm
  • Test Type: Simulated Wind Driven Debris Impact Test

Testing Video – Compressed Cement Sheet with ATA Impact Shield 3x4x32

End-on impact of a 4kg mass of timber with cross-section dimensions of 100mm x 50mm, impacting at 36m/s
Result: Pass

Detail

  • Site: Azuma – NATA Testing
  • Product: ATA Impact Shield 3x4x32
  • Dimensions: 1000mm H x 2950mm W
  • Infill Material: Polyethylene Composite cladded with blue board compressed cement sheeting
  • Infill Material Thickness: P.E: 2.6mm
  • Cement Sheeting: 7.5mm
  • Test Type: Simulated Wind Driven Debris Impact Test